Gauge Minitrix - Article No. 66509

Grade Crossing with Gates

Grade Crossing with Gates
Grade Crossing with Gates

Most Important Facts

Article No. 66509
Gauge / Design type Minitrix /
Kind Kits
Article not produced anymore.
Check with your local dealer
Find Dealer
  • Product description

    With electro-pneumatically controlled, slow speed gate
    action. Almost silent operation of the gates activated by
    momentary current, controlled by the train with contact
    tracks or manually with momentary current controller.
    Simple hookup for single-track operation without additional relay. Electric mechanism with safety end shutoff circuit.
    Individual mechanism for each side of the track, can
    therefore be used for multi-track routes, with prototypically opposed mounting of the crossing gates. Fully assembled with full-length gates for above baseboard
    installation: base for below baseboard installation and interchangeable half-length gates included. Road piece can be in-stalled right up to the outer edge of the rails. Dimensions for each crossing half 160 x 45 mm / 6-19/64" x 1-49/64".
    2 sets of warning signs and crossbucks with bases and
    components for gatekeeper's hut and 2 lineside telephone
    huts included.

    Four of each of these parts are included with the grade crossing.

    Spare parts for our articles can be found here in our spare parts search.

  • Publications

    - Main Catalog 2002 / 2003 - Main Catalog 2003 / 2004 - Main Catalog 2004 / 2005


ATTENTION: not for children under 3 years