Receiver for all DC locomotives with a current draw up to 1,000 milliamps (motor 1,000 milliamps, lights 300 milliamps). Suitable for digital locomotives with the 14-pin digital connector (mTc14).
Can be used universally in the Selectrix/SX2 and DCC format.
Automatic recognition of digital analog operation.
Maximum speed can be set.
Motor impulse variants can be set.
Automatic load compensation.
Connections for light functions.
Connections for an auxiliary function.
Short circuit protection of the motor outputs.
Overload protection of the light outputs.
Overload protection of the auxiliary function.
Programming of additional settings can be done by selecting the address "00", example: finer gradation of the impulse widths (control variants), pole reversal for direction changing.
In Selectrix operation:
31 speed levels. (Sx2 127 speed levels).
111 addresses. (Sx2 10,000 addresses).
1 auxiliary function (Sx2 16 auxiliary functions).
Block operation with simple diodes (1 or 2 stopping sections).
Braking operation with braking diode.
In DCC operation:
Manual speed level selection of 14/28 levels.
Automatic switchover to 128 speed level.
Address can be long or short.
Braking operation with direct current and "broadcast-mode" braking generators.
Dimensions approximately 14 x 9 x 1.8 mm / 1/2" x 3/8" x 1/16".
Spare parts for our articles can be found here in our spare parts search.